The Motorsport Line StreetSport Motor Mount Retrofit Kit for the MKIV VW GOLF/GTI 1.8T, MK1 AUDI TT 1.8T is designed to convert your existing TrackSport Motor Mounts into StreetSport Motor Mounts. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is only slightly higher than stock.

PRODUCT DESCRIPTION:

The Motorsport Line StreetSport Motor Mount Retrofit Kit for the Mk4/Mk1 chassis is designed to convert your existing TrackSport Motor Mounts into StreetSport Motor Mounts. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is only slightly higher than stock.

BUYER'S GUIDE:

The following guide is designed to help customers choose which mount best meets their specific needs.

StreetSport   TrackSport

Power levels exceeding Stage 1   Power levels exceeding conventional stages

Car is launched or taken to HPDE or Drag events   Car is heavily launched at drag strips or only used for track events

Car is used on road as a commuter   Ultimate performance and rigidity is desired 

Less NVH is desired   "Where we're going, we don't care about NVH!" 

 

FEATURES:

Converts TrackSport Mounts to StreetSport Mounts to Lower NVH

Manufactured from 6061-T6 Billet Aluminum

Anodized for Long Life and Great Looks

Extreme-Duty for the Most Punishing Performance Applications

Great Solution for Highly-Tuned Stock Turbo Power Levels

Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction

Significantly Less NVH than TrackSport Versions

Virtually Indestructible

Lifetime Warranty

Updates One Set of Engine/Transmission

HARDWARE REQUIREMENTS:

This product is intended to be used in conjunction with one of the following products. The mount bases of the kits shown below are swapped with the mount bases in this kit, resulting in the same spec as our StreetSport mounts.

034-509-5031: MOTORSPORT TRACKSPORT ENGINE/TRANSMISSION MOUNT PAIR, 8N AUDI TT 1.8T & MKIV VOLKSWAGEN GOLF 1.8T

NOTES:

Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure.